Travertine, marble and brick pavers protected from intense UV and salt air — with breathable premium sealants, not the industry shortcuts that crack, cloud and peel.
Most failed paver jobs were not bad products — they were bad installs. Here is what we do differently.
We reject the industry standard of overhyped polymeric sand — it cracks under thermal dynamics, Florida's daily heat-and-cool cycle. Joints get a stabilization that moves with the stone instead of fighting it.
Premium, vapor-permeable sealers that let the stone breathe. Cheap film-formers trap moisture underneath and peel; ours release it, so the finish holds through Florida rain and heat.
Our pH-altering deep clean leaves the joints naturally hostile to organic growth. Weeds are not trimmed at the surface — they are denied the environment they root in.
Travertine, marble and brick pavers are protected from intense UV rays and coastal salt air without suffocating the stone — colour locked in, surface still breathing.
Anyone can buy a bucket of sealer. The difference is knowing what the stone underneath actually needs.
Travertine is not brick, and brick is not concrete. Every stone has its own porosity, its own absorption rate, its own tolerance for product. Seal a damp surface, or an unclean one, and you lock the problem in — clouding, blotching, peeling within months.
We read the substrate first. Then we clean it, balance it, dry it, and seal it to a spec — not a guess.
"It's not the product. It's the install."
Three steps, done in the right order, by the person who quoted you.
The right agitation, chemistry and pressure for your stone — never damage. A high-volume, low-pressure rinse gathers the debris and alters the surface pH, leaving it hostile to weeds and ready to seal.
The step everyone skips. Joints stabilized, surface profiled and fully dried, absorption rate checked — so the sealer bonds clean, with no reaction, no lifting.
Spray-applied breathable sealer at a precise wet-mil thickness for your stone, in the finish you want — satin or a higher sheen — built for Florida sun, rain and salt air.
Need grip on a sealed surface? Our partner Signature Traction builds the SignaTrac non-slip system into the finish — safe barefoot, wet or dry.
A properly installed breathable sealer lasts about 2 to 4 years in South Florida before it needs resealing. Coastal properties sit at the shorter end of that range because UV intensity and salt air break sealers down faster. The install matters more than the product: a sealer applied over a poorly cleaned or still-damp surface can fail in months.
No. We reject the industry standard of overhyped polymeric sand because it cracks under thermal dynamics — Florida's daily heat-and-cool cycle. Instead we use pH-altering deep cleaning to stop weeds at the source and joint stabilization that moves with the stone instead of fighting it.
Sealing alone will not, but our process does more than seal. The deep clean alters the surface pH to leave the joints naturally hostile to organic growth, and the stabilized joints deny weeds the loose, damp sand they root in. Weeds are stopped at the source rather than trimmed at the surface.
Yes — sealed stone is more slippery when wet if nothing is done about grip. We tell people that plainly. When a pool deck or walkway needs traction, our partner Signature Traction builds the SignaTrac non-slip system into the finish so it is safe barefoot, wet or dry, without changing how the surface looks.
We seal travertine, marble and brick pavers. Each stone gets a different spec: natural stone is far more porous than concrete brick, so it needs a breathable, vapor-permeable sealer that protects against UV and salt air without suffocating the stone. A one-product-fits-all approach is how travertine ends up blotchy and peeling.
The surface must be fully dry — typically 24 to 48 hours after cleaning in Florida conditions, longer after heavy rain. Sealing over trapped moisture is the number one cause of clouding and peeling, so we never rush this step. Clean, prep, then seal — in that order, for a reason.
If your pavers, travertine or marble need sealing done right the first time, talk to us.
The person who quotes the job is the person who does it. No call center, no crew of strangers.